Cressida Lower Control Arm Polyurethane Bushes – Same as IS300?

Regarding front lower control arm inner bushes, this site has the part listed as fitting both MX83 Cressida and JCE10 IS300:

http://superpro.suspension.parts/spf3039k

As the superpro catalogue doesn’t list a MX83 lower control arm inner bush, it would be nice to confirm that it fits. Here’s the superpro info page for that part:

Superpro SPF3039K page

Note it doesn’t list MX83 on the application list.

Having both XE10 bushes and MX83 arms, I can confirm this WILL NOT fit. Measurements are taken off a new set of XE10 TRD bushes, and a set of used oem MX83 lower arms. Note the superpro part doesn’t include an outer shell, so measurements are taken on the inside of the existing shell.

XE10 on the left, Cressida on the right:

Inner tube length

IMG_0545
55.45mm

IMG_0546
59.43mm
Inner tube ID

IMG_0555
14.21mm

IMG_0559
14.21mm
Outer tube length

IMG_0576
35.12mm

IMG_0573
43.40mm
Outer tube ID

IMG_0570
38.01mm

IMG_0566
33.01mm

MX83 Toyota strut top bearings

This is regarding Toyota P/N 48609-22070 (factory Toyota only) strut mounts.

The bearings are a Nachi 6302 without seals. Nachi also make a sealed version

img_0281

I have no idea if they have a retaining compound on them, but if you know what you’re doing they should be replaceable. If yours are knocking or creaking replacing the bearings would be an economical alternative to getting new mounts.